Itel A60s (A662LM) Dead Boot Repair + EMMC Change Without EMMC Dump File Free Download 2025
You've come to the correct spot if you're looking for a way to fix the Itel A60s' (model A662LM) dead boot problem without using an EMMC dump file.
.png)
Key Features of This Method:
- No need for an original EMMC dump file
- Works with new/blank EMMC chips
- 100% tested on Itel A60s (A662LM)
- Includes pre-prepared file for direct programming
Symptoms of Dead Boot:
- Device not powering on
- No charging indication
- Not detected in SP Flash Tool or other flashing tools
- Blank screen even with key combinations
What You Need:
- Working PC/Laptop
- EMMC Programmer (e.g., UFI, Easy JTAG, etc.)
- Itel A60s (A662LM) Dead Boot Repair File
- Basic soldering/reballing skills (if changing EMMC)
Repair Procedure:
1. Replace the EMMC (if needed)
- Remove the faulty EMMC chip from the board.
- Reball or replace it with a compatible new EMMC.
- Place the new EMMC on the PCB and solder properly.
2. Write Dead Boot Repair File
- Open your EMMC programmer software (UFI Box / Easy JTAG).
- Connect the EMMC to the box.
- Write the provided Dead Boot Repair file directly to the new EMMC.
- The file includes preloader + partition data necessary to boot.
- No full dump or original data is required.
3. Reassemble & Boot
- Re-solder the EMMC to the board if needed.
- Reassemble the phone.
- Power it on — it should now boot or at least enter download mode.
- Flash full firmware via SP Flash Tool to complete recovery.
Notes:
- Always backup if you still have access to the old EMMC.
- This method is intended for technicians with basic EMMC handling skills.
- If device still doesn’t power on, check for hardware shorts or PMIC issues.