PrimeTool X 7.1.1 The Best Tool for Installing Drivers and Unlocking FRP
A powerful tool called PrimeTool X was created to assist customers in getting past Factory Reset Protection (FRP) locks on Samsung and Xiaomi smartphones. It is a vital tool for technicians and mobile repair specialists because it also contains the necessary drivers for MediaTek and USB Dk.
The user-friendly interface and contemporary GUI of this utility provide a straightforward driver installation and FRP lock unlocking procedure.
.png)
Features of PrimeTool X👇
Supports FRP removal for Samsung and Xiaomi devices [Xiaomi Redmi A3 Device support only]
Works in Preloader | Brom mode
Includes driver installation for MediaTek and UsbDk
Simple and modern user interface
One-click FRP removal
Supported Devices – PrimeTool X👇
Model Variant/Bit Support
Galaxy A02 All variants – Full Bit
Galaxy A02s A025M – Bit 9
Galaxy A03s All variants – Full Bit
Galaxy A04 All variants – Full Bit
Galaxy A04e All variants – Full Bit
Galaxy A05 All variants – Full Bit
Galaxy A05s A057F – Bit 8
Galaxy A05s A057M – Bit 9
Galaxy A06 All variants – Full Bit
Galaxy A10s All variants – Full Bit
Galaxy A11 A115M – Bit 5
Galaxy A11 A115F – Bit 6
Galaxy A20s A207F – Bit 5
Galaxy A20s A207M – Bit 4
Galaxy A32 All variants – Full Bit
Xiaomi Devices
Model Android Version
Redmi A1 Android 12
Redmi A2 Android 13
Redmi A3 Android 15
Redmi 9A Android 11
Redmi 10 (2022) Android 13
Redmi 12C Android 15
Redmi Note 12S Android 15
Redmi 13C Android 15
Redmi 14C Android 14
Motorola Devices
Model Android Version
Moto E22 Android 12
Moto E22i Android 12
Moto G05 Android 15
Moto G15 Android 15
Drivers Included
✔ MediaTek Driver
✔ UsbDk Driver
How to Use PrimeTool X👇
Step 1: Install the Required Drivers
Before using PrimeTool X for FRP removal, you need to install the required drivers.
- Open PrimeTool X and navigate to the Drivers tab.
- You will see options for Driver MediaTek and Driver UsbDk.
- Click the Instalar button next to each driver.
- Wait for the installation to complete.
Step 2: Select Your Device Brand
- Open PrimeTool X and select either Samsung or Xiaomi from the top menu.
- A list of supported models will appear on the left side.
Step 3: Choose Your Device Model
- Click on your device model from the left sidebar (e.g., Galaxy A10s or Redmi A3).
- The device details will be displayed in the main window.
Step 4: Connect Your Device in Preloader/Brom Mode
- Power off your phone.
- Press and hold the required boot key combination while connecting the phone to the PC using a USB cable.
- The tool will detect the device in Preloader | Brom mode.
Step 5: Erase FRP
- Click the Erase FRP button.
- Wait for the process to complete.
- Once done, your phone will reboot, and the FRP lock will be removed.
Step 6: Stop the Process (If Needed)
- If you need to stop the process at any point, click the Detener button.